Viper Model 480XV - Manual (Page 26)

27 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
high security disarm
This security system offers High Security Disarm. High Security
Disarm is a feature that makes it possible to silence and reset the
system while it is triggering, without disarming the system. If the
system is triggered and the siren has been sounding for longer
than six seconds, pressing or on the remote transmitter
will stop the trigger and return the unit to the armed state. The
system will not disarm, but rather reset. This prevents you from
disabling the system should you wish to disarm it without visu-
ally checking the vehicle. Pressing after resetting the system
will disarm the system; pressing this button during the first six
seconds of the triggered sequence will disarm the security system
immediately. The six second timer is provided for your conve-
nience, in case the system is accidentally triggered.
The remote will indicate disarm notification with 2 beeps and 5
flashes of the icon. If disarming after the system has been
triggered, the remote control will send a diagnostic notification
as a reminder. These diagnostic notifications are:
1. If a sensor triggered the system, the remote will emit 4 quick
beeps and the LCD screen will indicate which sensor (5-
flashes) tripped the alarm.
2. If a switch (Zone 1, 3, 5, or 6) triggered the system, the
remote will emit 4 quick beeps and the LCD screen will
indicate which switch (5-flashes) tripped the alarm.
➜