Viper Model 480XV - Manual (Page 29)

30 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .
door controlled
The interior light activates for 30-seconds after the system sees a
door has closed. (If door was held open for longer than 3
minutes the interior light will not illuminate.)
full
The interior light activates for 30-seconds after seeing door
closure, ignition, or security disarm. (This is the factory setting.)
silent mode
To arm or disarm the system without siren chirps, use Silent
Mode™. Simply press for less than one second before
arming or disarming, and the confirmation chirp(s) will be elim-
inated for that one operation only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.
valet mode
You can prevent your security system from automatically arming
and triggering by using Valet Mode. This is very useful when
washing the vehicle or having it serviced. In Valet Mode, the
security system will not arm, even with the remote transmitter,
but all convenience functions (door locks, boot release, etc.) will
continue to work normally.
➜
note: The Warn Away ® response from any optionally
installed sensors are bypassed if the system is armed using
Silent Mode. This ensures that no chirps will be emitted
by the siren in an area you want chirp-free. The system is
still fully capable of triggering. Only the Warn Away
®
response is bypassed.
➜