Pprro og grra am mm miin ng g o op pttiio on nss – Viper Model 480XV User Manual

Page 42

Advertising
background image

43

© 2 0 0 5 d i r e c t e d e l e c t r o n i c s , i n c .

p

prro

og

grra

am

mm

miin

ng

g o

op

pttiio

on

nss

See your dealer for further details on the options listed below

available with this system.

Comfort Closure

: Windows will close upon locking the vehicle.

Dual Sensor Trigger

: If programmed, both the onboard and at

least one of the optional sensors need to be triggered within 1-

second of each other for full alarm.

Forced Passive Arming

: If passive arming is on and a door is left

open the system will be armed after 1-hour.

High Security Disarm:

If the system is triggered this feature allows

the user to silence the siren and reset the system to the armed

state without having to visually check the system status.

Remote Start Reporting

: This channel 3 programmable option

allows for the 2-way LCD transmitter to report when the vehicle

has been remote started provided the 561T remote starter has

been installed.

Retained Accessory Power

: This output from the security system

can be connected to vehicle accessories, such as the vehicle radio.

After the ignition has been turned off, it will continue to supply

power until a door has been open and closed.

note: In dual sensor mode, the LCD remote will report
showing both zones that tripped the alarm. The in-vehicle
LED will flash to indicate only the last sensor of the pair
which tripped the alarm.

Advertising