Vision Fitness ST200 - Manual (Page 11)

11
3
STEP
• Place the top front structure (3a) on top
of 2f and attach with two bolts
(M10x1.5Px60L), two flat (10.5x18x2T)
washers, and two nuts (M10x1.5P).
Tighten fasteners with a 6mm L-shaped
wrench and a 17mm wrench.
• Attach the seat (3b) up through the
bottom of 2a with four bolts
(M10x1.5Px25L). Attach the seatback
(3c) through 2c with four bolts
(M10x1.5Px25L). Tighten with a 6mm
L-shaped wrench.
PINK BAG
2a
3b
2c
3c
3a
2f
Notch is
in front