Vision Fitness ST200 User Manual
Page 2
2
To avoid possible damage to this Functional Trainer, please follow these assembly steps in the correct order. Before
proceeding, find your new Functional Trainer serial number located on the back of the rear floor support (1a), and enter here:
Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records. Be
sure to read your Owner’s Guide before using your new Functional Trainer.
If any parts, hardware or tools are missing, please call 1.800.335.4348, Extension 12
NOTE:
It is recommended that you apply grease to the threads of each screw as you assemble your Functional Trainer to
prevent loosening and noise. Also, during each assembly step, ensure that ALL screws are in place and partially threaded in before
completely tightening any ONE screw.
A s s e m b l y
G u i d e
ST200
FUNCTIONAL TRAINER