Switching between the user programs – VOX Amplification USA VTX150 User Manual
Page 6
6
2.
Turn the AMP selector to choose an amp model.
A preset program for a sound that is typical of each amp model will be re-
called, and the GAIN, VOLUME, TREBLE, MIDDLE, BASS, and effect settings
will switch automatically.
HINT:
The amp models are organized into four banks, each bank containing
eleven models (a total of forty-four). Press the AMP switch to change banks.
Each time you press this, the AMP LED will switch to green, orange, red, or
blue and you’ll switch to amp banks STD, SPL, CST and EXT. Each of the forty-
four amp models has three preset programs (a total of one hundred and thirty-
two programs). In Preset mode, pressing the PRESET switch will cycle the
PRESET LED among green, orange, and red, switching among preset programs
1 (basic), 2 (effect), and 3 (song).
Each song program reproduces the tone of a hit played by a famous guitarist.
See the chart on page 39 for a list of the songs presets included with your
amplifier.
Switching between the user programs
1.
Press one of the top panel CHANNEL switch (CH1, CH2, CH3, or CH4).
The LED for the CHANNEL switch you pressed will light up, and the user
program specified for that channel will be recalled (Channel Select mode).
HINT:
The user programs are organized into two banks, each bank con-
taining four channels (a total of eight programs). Press the CHANNEL
BANK switch to switch banks. Each time you press it, the BANK LED will
change between green and red, switching between channel banks 1 and 2.
If an optional (separately sold) VC-12SV foot controller is connected,
you’ll be able to use four banks (a total of 16 programs). To switch to
banks 3 or 4, use the VC-12SV’s BANK UP/DOWN switches and foot
switches [1]–[4].
HINT:
You can store your own favorite sounds in a program. For details,