VOX Amplification USA VTX150 User Manual

Page 9

Advertising
background image

9

PEDAL selector

VALUE knob

TUNER (BYPASS) LEDs

BANK switch

BANK LED

TUNER (BYPASS) switch

CHANNEL LED

CHANNEL switch

4. CHANNEL/TUNER section

BANK and CHANNEL switches, LEDs

Use the BANK switch to
select the channel bank.
In Channel Select mode,
the BANK LED will be
lit-up green or red.
Use the CHANNEL
switches to select chan-
nels. The LED of the selected channel will be lit up. To save a new program,
hold down the desired CHANNEL switch for two seconds or longer.
If you want to save a new program in a different bank, hold down the BANK
switch for 0.5 seconds or longer (until the BANK LED starts blinking) and
select the desired destination bank (p. 16 “Saving a program”).

HINT:

If you’re using the optional (separately sold) VC-12SV foot control-

ler and bank 3 or 4 is selected, the BANK LED will be unlit. Use the VC-
12SV’s BANK UP/DOWN switches to select bank 3 or 4.

When the tuner function is turned on, the BANK and CH 1–4 LEDs will indicate
the string number (a pitch note closest to the input sound) (p. 18 “Using the
tuner”).

TUNER (BYPASS) switch and LED

Pressing the TUNER (BYPASS) switch will turn all effects off (bypass), and
engage the tuner function. If you want to tune your instrument with the amp
output muted, press the TUNER (BYPASS) switch for one second or longer.
When the tuner function is turned on, the TUNER (BYPASS) LEDs will display
the tuning status (p. 18 “Using the tuner”).

5. PEDAL section

Here you can adjust the settings for pedal
effects.
For details on each effect, please refer to “Pedal
effects” (p. 30).

PEDAL selector

This selects the effect type. When you switch
the effect type, the parameter settings of the effect will be initialized.

VALUE knob

This adjusts the parameters of each effect.
To turn the pedal effect off, rotate this knob all the way to the left.

Advertising