Verizon 7500 User Manual
Page 119
Advertising
030-300536 Rev. A
119
August 2007
User Guide
VersaLink Wireless Gateway (Model 7500)
To configure DMZ Host, in the DMZ Host screen, select a device from the drop-down menu. The selected device
will share your WAN IP address. Next, click Enable to allow the setting to take effect.
NOTE: The actual values may differ from the values displayed in this screen.
If you clicked Enable in the preceding screen, the following pop-up screen will appear. The Router must be reset to
allow the new configuration to take effect. Click OK to continue.
Advertising