5 advanced lan statistics – Verizon 7500 User Manual

Page 176

Advertising
background image


030-300536 Rev. A

176

August 2007

User Guide

VersaLink Wireless Gateway (Model 7500)

17.2.5 Advanced LAN Statistics


In the Advanced Status screen, click Advanced LAN Statistics. The following screen will be displayed. After you
have viewed the details in this page, click Close to return to the Advanced Status screen.

DSL Connection Information

Connection Rate

This field will let you know if you have a DSL signal and the DSL rate at which you are
connected.

Connection Status

This field will show how much information was received (IN) or sent (OUT) in packets.

IP Network Address

PPP = An IP address identifies your device on the Internet
Primary DNS = Provided by your Service Provider
Secondary DNS = Provided by your Service Provider

Ethernet Status

This field will display your Ethernet information that was received (IN) or sent (OUT) in
packets on your Ethernet port.

ATM Network Address This field will display your VPI and VCI values, which are provided by your ISP.
Firewall Status

This field will display your firewall traffic in packets.
Passed: Monitors information traffic that was successfully received (IN) or transmitted
(OUT) in packets.
Dropped: Monitors information traffic that was not successfully received (IN) or
transmitted (OUT) due to your firewall settings.

PPP Connection Information

Connection Name

This is from the connection profile that you established in section 8.

Connection Duration

This field will display how long your PPP session has been connected.

Status

This field will display the status of your PPP session.
UP=Connected
DOWN=Disconnected

Number of Reconnects This field will display the number of attempts that were made to establish a PPP session.

Advertising