Verizon 7500 - Manual (Page 21)

030-300536 Rev. A 21 August 2007
User Guide VersaLink Wireless Gateway (Model 7500)
8. Windows 98 SE: Figure 9 may pop up, depending on how Windows 98 SE was installed on the computer. The
installation of the Router requires files that are supplied by Microsoft for Windows 98 SE. If Figure 10 pops up,
insert the Windows 98 SE Operating System CD into the computers CD-ROM drive, wait a moment for the CD to
be recognized by the system, and then click on OK. The system should find the required files on the Windows 98
SE CD-ROM and automatically complete the installation.
Figure 9. Windows 98 SE
If the Operating System CD is not available, or if Figure 9 pops up again, you will have to manually specify the
location of the files. The required files may be stored on your hard drive. A common location for these files is
"C:\Windows\Options\Cabs." Try specifying this path or the path to your CD-ROM drive (usually "D:\") by clicking
the Browse… button in the Insert Disk screen (Figure 10). When you have specified the correct path, click on OK.
The system will begin copying the files.
IMPORTANT: It is very important that the Windows 98 SE files be installed. Do not click on Cancel or Skip File
in the dialogs; doing so will result in an improper installation, and the Router will not function correctly.
Figure 10. Windows 98 SE