Verizon 7500 User Manual

Page 158

Advertising
background image


030-300536 Rev. A

158

August 2007

User Guide

VersaLink Wireless Gateway (Model 7500)

IP Address Distribution

IP Address
Distribution

Factory Default = Private LAN
This setting allows VersaLink to automatically assign IP addresses to local devices
connected to the LAN.
Off = DHCP Server is disabled
Private LAN = DHCP addresses will be issued from the Private LAN DHCP server.

Start IP Address

Factory Default = 192.168.1.15
This field displays the first IP address that the DHCP server will provide. The DHCP
Start Address must be within the IP address and lower than the DHCP End Address.
You can use any number from 0 to 254 in this address.

End IP Address

Factory Default = 192.168.1.47
This field displays the last IP address that the DHCP server will provide. The DHCP
End Address must be within the IP address and higher than the DHCP Start Address.
You can use any number from 0 to 254 in this address.

DHCP Lease Time

Factory Default = 01:00:00:00
Displays the amount of time the provided addresses will be valid, after which the DHCP
client will usually resubmit a request.
Note: This value must be greater than 10 seconds. Seconds must be between 0 and 59,
minutes must be between 0 and 59, and hours must be between 0 and 23.


By default Private LAN is already enabled. To disable the Private LAN DHCP server, select Off from the IP
Address Distribution
drop-down menu.










Advertising