Western Telematic WTI NetReach APS-16M - Manual (Page 21)

5-5
Confi guration
5.4.1. The Password Directory
APS-8/16M passwords are defined using the "Edit Password Directory"
menu, which is accessed via the System Parameters menu (/F). In addition
to assigning command level privileges to each password, the Edit Password
Directory function also allows you to determine which ports each password
will be allowed to access, and includes prompts that are used to configure
several Dial Back parameters. The Password Directory allows for the
definition of up to 32 separate passwords.
Note:
• The Edit Password Directory menu is only available to users who
have logged into command mode using a password that permits
access to Supervisor Mode.
• The /V command can also be issued to view the Password Directory.
To activate the Edit Password Directory menu, you must first access the
command mode, and then type /F and press [Enter] to display the System
Parameters Menu. At the System Parameters Menu, type 5 and press [Enter]
to display the Edit Password Directory menu (Figure 5.2.) The Edit Password
Directory Menu offers the following options:
1. Add Name/Password: Creates new passwords and assigns Supervisor
Mode access and port access rights as described in Section 5.4.1.1.
2. Edit/Delete from List: Edits/Deletes passwords. The desired password
is selected by scrolling through a list of all passwords as described in
Section 5.4.1.2.
3. Edit/Delete from Search: Edits/Deletes passwords. The desired
password is selected using a search function as described in
Section 5.4.1.2.
4. Delete Entire Directory: Clears the password directory, and deletes all
existing passwords as described in Section 5.4.1.3.
EDIT PASSWORD DIRECTORY:
1. Add Name/Password
2. Edit/Delete from List
3. Edit/Delete from Search
4. Delete Entire Directory
Enter: #<CR> to select,
<ESC> for previous menu ...
Figure 5.2: The Edit Password Directory Menu