Wolf Appliance Company 811504 - Manual (Page 13)

Pro Wall Hood Installation 13
wolfappliance.com/specs
WIDTH OF HOOD
26 1/4 " (667) TO
MOUNTING BRACKET
HOLE CENTERS
13 1/8 "
(333)
HOOD CENTERLINE
USE ROUND
AND SLOTTED
HOLES TO
SECURE HOOD
TO WALL
STUDS
MOUNT
BRACKETS TO
WALL FRAMING
7 7/16 " (189)
TO TOP OF
BRACKET
Hood installation.
Low-Profile Wall Hoods
HOOD INSTALLATION
If a backsplash is being installed, it must be installed prior
to mounting the hood.
Install wall mounting brackets. Refer to the illustration
below. Position wall hood on brackets in desired location.
Insert #10 x 2" (59) screws through the mounting holes on
the back plate. Verify the screws engage two wall studs or
blocking.
If additional support is required, drill supplementary holes
through the back plate and secure with screws.
Refer to page 16 for electrical connection information.