Wolf Appliance Company 811504 - Manual (Page 3)

Wolf Pro Wall Ventilation Hoods 3
wolfappliance.com/specs
Pro Wall Hood Installation
IMPORTANT NOTE: This installation must be completed
by a qualified installer or Wolf factory certified service.
Read this entire installation guide and blower installation
instructions prior to installation and save for the local
inspector’s reference. The homeowner should keep this
installation guide for future reference.
This appliance must be installed in accordance with
National Electrical Codes, as well as all state, municipal
and local codes. The correct voltage, frequency and
amperage must be supplied to the appliance from a dedi-
cated, grounded circuit which is protected by a properly
sized circuit breaker or time delay fuse. The proper
voltage, frequency and amperage ratings are listed on the
product rating plate.
Record the model and serial numbers before installing the
ventilation hood. Both numbers are listed on the product
rating plate, located inside the left wall of the hood. Refer
to the illustration below.
Wolf Pro Ventilation Hood
Model Number
Serial Number
Location of rating plate
(inside hood).
RATING PLATE