Wolf Appliance Company 811504 - Manual (Page 17)

Pro Wall Hood Installation 17
wolfappliance.com/specs
WOLF LOGO
To install the Wolf logo, clean the mounting area with
rubbing alcohol. Remove paper backing from the logo,
position parallel with the bottom of the hood and press to
place.
Complete the Installation
FILTER INSTALLATION
To install filters, press upward then rotate bottom outward.
The filter vanes should be placed perpendicular to the
front of the hood. Refer to the illustration below. To aide in
removal, remove center filter first. Gloves should be worn
when handling filters.
LIGHT BULB INSTALLATION
A suction-cup-style light bulb changer is provided with
pro ventilation hoods. Use the changer to push the bulb
into the receptacle and rotate counterclockwise one-
quarter turn. Refer to the illustration below.
FILTER
SIDE VIEW
SPRING GREASE
CUP
Filter installation. Light bulb installation.
LIGHT BULB
CHANGER