Weider 831.159530 - Manual (Page 13)

13
27. Wrap the Press Cable (80) around a 3 1/2” Pulley
(37). Attach the Pulley and a Cable Trap (44) to
the Press Upright (6) with a 3/8” x 3 3/4” Bolt
(62), a 3/8” Washer (75), and a 3/8” Nylon
Locknut (74). Make sure the Cable Trap is
turned to hold the Cable in the groove of the
Pulley.
27
80
44
37
74
75
62
6
28. Wrap the Press Cable (80) around a 3 1/2” Pulley
(37). Attach the Pulley and a Cable Trap (44) to
the bottom of the Press Upright (6) with a 3/8” x
3 3/4” Bolt (62), a 3/8” Washer (75), and a 3/8”
Nylon Locknut (74). Make sure the Cable Trap
is turned to hold the Cable in the groove of
the Pulley.
28
80
44
74
75
62
37
6
26. Wrap the Press Cable (80) around a 3 1/2” Pulley
(37). Attach the Pulley to the other side of the
Press Frame (14) with a 3/8” x 3 1/2” Bolt (65), a
3/8” Washer (75), and a 3/8” Nylon Locknut (74).
26
14
65
75
80
74
25. Wrap the Press Cable (80) around a “V”-Pulley
(38). Attach the Pulley to the Press Upright (6)
with a 3/8” x 3 3/4” Bolt (62), a 3/8” Washer (75),
and a 3/8” Nylon Locknut (74).
25
38
62
75
6
80
74
37