Weider 831.159530 - Manual (Page 15)

15
34. Wrap the Press Cable (80) around a 3 1/2” Pulley
(37). Attach the Pulley to the bracket on the Top
Frame (5) with a 3/8” x 2” Bolt (79) and a 3/8”
Nylon Locknut (74).
33. Wrap the Press Cable (80) around a 3 1/2” Pulley
(37). Attach the Pulley to the bracket on the Press
Top Frame (13) with a 3/8” x 2” Bolt (79) and a
3/8” Nylon Locknut (74).
33
13
37
74
79
5
Bracket
74
80
Bracket
37
35. Remove the 3/8” x 2 1/2” Bolt (78) from the top of
the indicated Weight Carriage (28). Attach the end
of the Press Cable (80) to the Weight Carriage
with the Bolt (78) and 3/8” Nylon Locknut (74).
36. Identify the Butterfly Cable (81); it is approximate-
ly 52” long and it has a loop on both ends.
Secure a 3/8” x 1” Bolt (97) to the bracket on the
Left Butterfly Arm (17) with a 3/8” Nylon Jamnut
(88). Attach one end of the Butterfly Cable (81) to
the Bolt with another 3/8” Nylon Jamnut. Do not
tighten the second Nylon Jamnut; the Cable
must be able to pivot freely.
80 79
35
36
Bracket
81
97
88
17
34
80
28
74
78