Weider 16.8ST - Manual (Page 9)

9
Arm Assembly
46
12
54
33
20
9
9
20
33
10. Attach the Press Arm (46) to the Press Frame (12)
with two 3/8Ó x 2 1/2Ó Bolts (54) and two 3/8Ó Nylon
Locknuts (50).
Insert a 2Ó Square Inner Cap (33) into each end of
the Press Arm (46).
Turn one of the Adjustment Knobs (9) counterclock-
wise to loosen it. Pull out the Knob as far as possible
and slide a Handle (20) into the Press Arm (46).
Release the Knob and let it snap into one of the
adjustment holes in the Handle. Tighten the Knob
fully. Repeat for the other Handle.
10
50
11. Attach the Handles (105) to the Sliding Seat Frame
(74) with four 1/4Ó x 1 1/2Ó Bolts (101) and four 1/4Ó
Nylon Locknuts (25).
Press a 2Ó Square Inner Cap (33) into the indicated
end of the Sliding Seat Frame (74).
101
101
105
25
33
74
11
25
105
9
9. Open the parts bags labeled ÒARM ASSEMBLYÓ.
Attach the Leg Lever Lock (11) to the front leg of the
Base (8) with a 5/16Ó x 3Ó Bolt (78), three 5/16Ó Flat
Washers (80), and a 5/16Ó Nylon Locknut (81). Do not
overtighten the Nylon Locknut; the Leg Lever
Lock must pivot easily.
78
11
80
80
81
Front
Leg
8