WhisperKool XLT SERIES XLT 6000 - Manual (Page 18)

Page 16 XLT 020111
1. Wine Temperature Indicator: A red LED bar will light up when the thermostat is
reading the liquid temperature in the bottle via the probe. This will remain lit and
the temperature you see displayed is what the probe is reading.
2. LED Screen: Displays your thermostat readings.
3. Wine Temperature Reading: The temperature the water bottle is registering to
the thermostat.
4. Temperature SET Indicator: A red LED bar will light up when you are setting the
temperature.
5. Unit ON Indicator: A red LED bar will light up every time the unit turns on to run
a cooling cycle.
6. SET Button: Used to set the temperature you want the unit to maintain.
7. UP Arrow Button: Used with the SET button to set temperature higher. In addi-
tion, by pressing and holding the button it will allow you to see the 5-minute count
down.
8. DOWN Arrow Button: Used with the SET button to set temperature lower.
*Up and Down Arrow Buttons used simultaneously will change the tempera-
ture read out from Fahrenheit to Celsius*
PDT OPERATING INSTRUCTIONS
WINE Temperature Indicator
Wine Temperature Reading
LED Screen
1
3
2
4
5 6
7 8
Temperature SET Indicator
Button
UP Arrow Button DOWN Arrow Button
Unit ON Indicator Button SET Temperature Button
Temperature
Precision digital Technology Thermostat
PDT
WINE
ON
SET
55
F
SET
The unit is set at 55°F at the factory. To raise or lower the set temperature, press the set button while at the
same time pressing either the arrow up or arrow down button.