WhisperKool XLT SERIES XLT 6000 User Manual

Page 29

Advertising
background image

Page 27

XLT 020111

THIRD TEMPERATURE TEST:

10. Once the unit has run for 24 hours, perform the third temperature test.
11. Record information and calculate temperature differential in table below for the condenser/back

side section under the second test.

TEMPERATURE DATA FROM TESTING

*When measuring outlet air temperature on both sides of the unit (from the circular fans), hold the

thermostat at the outer edges of one of the circular fans.

TEMPERATURE TESTING LOCATIONS

Temperature / Test

(time)

First

(after 5 mins)

Second

(after 8 hrs)

Third

(after 24 hours)

Ev

ap

or

at

or

(F

ron

t) Side

Condenser (B

ack) Side

Inlet Air

Outlet Air

Differential

(Inlet - Outlet = _; ideally 10°F - 15°F)

Inlet Air

(Ideally < 85°F)

Outlet Air

(Ideally < 120°F)

Differential

(Inlet - Outlet = _; ideally 10°F - 15°F)

INLET AIR -- Evaporator (Front) Side*

INLET AIR -- Condenser (Back) Side*

OUTLET AIR -- Evaporator (Front) Side*

OUTLET AIR -- Condenser (Back) Side*

Advertising
This manual is related to the following products: