ZyXEL Communications PES-1014 - Manual (Page 45)

PES-1014 User’s Guide
Trunk 6-5
Figure 6-5 Port-based Mode Trunk Configuration Screen
6.3.5 Port-based Mode Port Mapping
Move the cursor over the Trunk link and click P. Mode Mapping to display the Port-based Mode Port Mapping
screen shown next. Use this screen to view and modify port mappings of assigned trunks when using Port-based
Load Balancing.
Figure 6-6 Port-based Mode Mapping Screen
After configuring, click Apply to make the changes effective or click Reset to go back to the previous
configuration. Select one trunk at a time for port mapping.
Table 6-4 Port-based Mode Mapping
FIELD DESCRIPTION
Trunk ID This field displays the number of the trunk that is currently displayed. Use the down
arrow to select the number of another trunk that has been set to Port Based Mode. If
no trunk has been set to Port Based Mode, the screen will show “none”.
Trunk Port These are the trunk ports in the trunk ID that you selected above.
Assigned This field shows whether or not individual trunk ports have been assigned to this
trunk.