ZyXEL Communications PES-1014 - Manual (Page 54)

PES-1014 User’s Guide
8-4 Forwarding Database
Table 8-3 Edit Static Entry Description
FIELD DESCRIPTION EXAMPLE
Entry ID There are 256 static entries available in the system, and each static entry must
have a unique ID number (from 1 to 256). Select an Entry ID to link to its
corresponding static entry for editing. 1
Status Select Enable to activate or Disable to deactivate the selected static entry.
Disabled static entries will not be shown on the Current Static Entries screen.
Enable
Port/Trunk
Member Click one radio button in either the Port column or the Trunk column.
MAC Enter the MAC address of the computer’s Network Interface Card (NIC) that you
are connecting to. You must assign a unique and legal MAC address for each
static entry for security identification and port selection purposes while transmitting.
Different entries can be assigned with the same port/trunk, but the MAC addresses
have to be different.
00.00.00.0
0.00.1A
Click Apply to save your changes to working memory or click Reset to go to the previous configuration. Refer
to 3.4.4 for directions on saving your changes to flash memory before you restart the switch.