ZyXEL Communications P-202 - Manual (Page 116)

P-202H Plus v2 Support Notes
Get Community= public
Set Community= public
Trusted Host= 192.168.1.33
Trap:
Community= public
Destination= 192.168.1.33
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Option Descriptions
Get
Community
Enter the correct Get Community. This Get Community must
match the 'Get-' and 'GetNext' community requested from the
NMS. The default is 'public'.
Set
Community
Enter the correct Set Community. This Set Community must
match the 'Set-community requested from the NMS. The default is
'public'.
Trusted Host
Enter the IP address of the NMS. The P-202H Plus v2 will only
respond to SNMP messages coming from this IP address. If
0.0.0.0 is entered, the P-202H Plus v2 will respond to all NMS
managers.
Trap
Community
Enter the community name in each sent trap to the NMS. This
Trap Community must match what the NMS is expecting. The
default is 'public'.
Trap
Destination
Enter the IP address of the NMS that you wish to send the traps
to. If 0.0.0.0 is entered, the P-202H Plus v2 will not send trap
any NMS manager.
13. Using Multi-NAT
• What is Multi-NAT?
• How NAT works
• NAT Mapping Types
• SUA Versus NAT
• SMT Menus
1. Applying NAT in the SMT Menus
All contents copyright © 2006 ZyXEL Communications Corporation.
116