ZyXEL Communications P-202 - Manual (Page 183)

P-202H Plus v2 Support Notes
See the screen shot:
2. Setup SonicWALL
1. Login SonicWALL by giving the LAN IP address of SonicWALL, default is
192.168.168.1.
2. Click Gernal menu, and click Network tab.
3. Select NAT Enabled as the Network Addressing Mode.
4. In LAN Settings, enter a LAN IP and Subnet Mask for SonicWALL.
5. In WAN Settings, enter a WAN IP, Subnet Mask, and WAN Gateway for
SonicWALL.
All contents copyright © 2006 ZyXEL Communications Corporation.
183