ZyXEL Communications P-202 - Manual (Page 188)

P-202H Plus v2 Support Notes
See the screen shot:
2. Setup WatchGuard
1. In the QuickSetup Wizard, select Configure in Routed Mode, click Next.
2. Enter IP of PC2, click OK.
3. In External Interface, enter the WAN IP for WatchGuard; and in Trusted
Interface, enter the LAN IP for WatchGuard. Then click Next.
4. Enter the Default Gateway of WatchGuard then click Next twice.
5. Enter your passwords for Status and Configuration then click Next.
All contents copyright © 2006 ZyXEL Communications Corporation.
188