ZyXEL Communications P-202 - Manual (Page 52)

P-202H Plus v2 Support Notes
• Configuration
• If the Cisco router requests PAP, you have to configure more settings in
Menu 13 as follows.
Menu 13 - Default Dial-in Setup
Telco Options: IP Address Supplied By:
CLID Authen= None Dial-in User= Yes
IP Pool= No
PPP Options: IP Start Addr= N/A
Recv Authen= CHAP/PAP IP Count(1,4)= N/A
Compression= Yes
Mutual Authen= Yes Session Options:
O/G Username= test Edit Filter Sets= No
O/G Password= ********
Multiple Link Options:
Max Trans Rate(Kbps)= 128
Callback Budget Management:
Allocated Budget(min)= 0
Period(hr)= 0
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
o
Set 'Mutual Authen' to 'Yes'
o
Set 'PAP Login' to the appropriate login name
o Set 'PAP Password' to the appropriate login password
• If the Cisco route requests CHAP, you have to configure more settings in
Menu 11 as follows.
All contents copyright © 2006 ZyXEL Communications Corporation.
52