ZyXEL Communications P-202 - Manual (Page 129)

P-202H Plus v2 Support Notes
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Pri Phone #= 1234
Sec Phone #=
My Login= ChangeMe
My Password= ********
My WAN IP Addr= 0.0.0.0
NAT= SUA Only
Address Mapping Set= N/A
Telco Options:
Transfer Type= 64K
Multilink= Off
Idle Timeout= 100
Press ENTER to Confirm or ESC to Cancel:
From Menu 4 shown above simply choose the SUA Only option from the NAT
field. This is the Many-to-One mapping discussed earlier. The SUA read only
option from the NAT field in menu 4 and 11.3 is specifically pre-configured to
handle this case.
All contents copyright © 2006 ZyXEL Communications Corporation.
129