Xerox 96MX - Manual (Page 147)

SPECIFYING INPUT PARAMETERS
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 4-55
UNPACK
This parameter specifies the unpacking method of the input data
when required.
Syntax VOLUME UNPACK = option(s)
Options Table 4-61 lists the parameter option(s) and definition(s).
Table 4-61. UNPACK parameter option(s) and definition(s)
Option(s) Definition(s)
NONE Does not perform the unpacking operation.
The default is NONE.
T4X3 or
T4X3H2 Specifies unpacking routines in which 6-bit
characters are extracted and restored as 8-bit bytes.
T4X3 is used primarily for Honeywell 6000 tapes
while T4X3H2 is used for Honeywell 2000 tapes.
UNIVAC Specifies an unpacking routine used for UNIVAC
tapes, although you can specify any of these routines
independent of the HOST type.