Xerox 96MX - Manual (Page 248)

PRINT FORMAT COMMANDS
6-74 XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
TMODE
This parameter specifies paper sizes in order to improve throughput
efficiency.
Syntax OUTPUT TMODE = option(s)
Options Table 6-66 lists the parameter option(s) and definition(s).
Width values can range from the 8-inch equivalent to the 17-inch
equivalent.
If you use inches (the default), refer to the table in the “Points to note”
section for the value ranges, pages-per-minute speeds, and uses
available for the various pitch modes.
The default depends on the specified paper size; the default value is
in inches.
Table 6-66. TMODE parameter option(s) and definition(s)
Option(s) Definition(s)
( width
[, width unit])
This option has the following components:
• width
The process direction measurement that
determines the default pitch mode.
•
width unit
Defines the unit of measurement for the default
pitch mode in IN, CM, DOTS, and XDOTS.
IN (INCHES) is the default.