Example – Xerox 96MX User Manual
Page 308
Advertising
USING LOGICAL PROCESSING
7-28
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE
Example
Following is an example of using the ROFFSET command.
A file has multiple reports without any delimiters separating the
reports (as illustrated below). Each page of the report has a page
number as part of the heading. Each report causes renumbering of
the pages starting with Page...1. With the ROFFSET command
coded below, an offset occurs for all passes of the reports.
T1: TABLE CONSTANT=(’PAGE...1’);
C1: CRITERIA CONSTANT=(105,8,EQ,T1);
ROFFSET TEST=C1, PASSES=ALL
Figure 7-5 shows a sample ROFFSET command usage.
Figure 7-5.
Sample ROFFSET command usage
Advertising