Xerox 96MX - Manual (Page 89)

CREATING A JOB SOURCE LIBRARY (JSL)
XEROX DOCUPRINT 96/DOCUPRINT 96MX LPS PDL REFERENCE 3-29
Xerox 4850 and 4890 HighLight Color LPS
This section explains how the Xerox DocuPrint 96/DocuPrint 96MX
LPS runs applications created for the 4850 and 4890 HighLight Color
Laser Printing Systems.
Running 4850/4890 applications on your Xerox DocuPrint 96/DocuPrint 96MX LPS
If you have a Xerox 4850 or 4890 version 4.0 HighLight Color LPS,
your applications probably include the use of blue, red, or green
highlight color. The JDL used to print these applications contain
commands and parameters which specify the location and the color
ink to be used. Your Xerox DocuPrint 96/DocuPrint 96MX LPS will
compile, process, and print these jobs, ignoring the ink specified and
using the default black ink.
The following PDL commands, parameters, and DJDEs allow ink
specifications:
PDL commands and parameters PDL commands and parameters include the following:
• ABNORMAL command
— IMISMATCH parameter
— ISUBSTITUTE parameter
• CME command
This command consists of the INK parameter.
•
IDR command
— ICATALOG parameter
— ILIST parameter
— PALETTE parameter
•
LINE command
This command consists of the INKINDEX parameter.
• OUTPUT command
— BFORM parameter
— CYCLEFORMS parameter
— FORMS parameter
— IDFAULT parameter
— IDR parameter
— IMAGE parameter
— IRESULT parameter
— NUMBER parameter
— XMP parameter
• VOLUME command
This command consists of the INTERPRESS parameter.