Xerox 450c - Manual (Page 74)

74
Sending a Fax
You send a fax at the WorkCentre using the keys on the
control panel. By default, the WorkCentre uses standard
resolution and normal contrast.
When sending a fax, you can use the following dialing
methods:
Note Make sure the document you want to fax is free
of rips, wrinkles, folds, staples, paper clips, and sticky
notes.
At any time before sending the fax, you can press the EXIT/
CLEAR key to remove the document from the
WorkCentre.
1. At the WorkCentre 450c, load up to 20 pages face
down in the document tray.
Direct dial Enter the fax number using the numeric keypad.
Speed dial Press SPEED DIAL and enter the speed dial num-
ber. To use speed dial, you need to create a
Phonebook.
Manual dial If your telephone is connected to the WorkCentre,
dial the fax number using the telephone handset.