Xerox 450c - Manual (Page 75)

75
2. Do one of the following:
• Using the numeric keypad, enter the fax number.
• To change the fax number, press the
LEFT
ARROW key to move the cursor to the left, press
the RIGHT ARROW key to move the cursor to the
right, and press the EXIT/CLEAR key to delete a
highlighted number.
• Press SPEED DIAL and enter the speed dial
number.
Note Depending on your phone system, you may
need to enter a prefix (for example, 8 or 9) and press
the PAUSE key to add a timed interval before entering
the fax number.
3. Press START .
The WorkCentre dials the fax number, sends the fax, and
sounds a confirmation beep when the transmission is
complete. By default, the WorkCentre prints a report if the
fax could not be sent.
To cancel the transmission before the WorkCentre sends
the fax, press the
STOP key and then the ENTER key.