Switching from pulse to touch- tone dialing during – Xerox 450c User Manual
Page 85
85
Switching from pulse to touch-
tone dialing during
a dialing sequence
If your phone line uses pulse (rotary) dialing, you can
switch from pulse to touch-tone dialing when sending a fax.
Depending on your telephone system, you may need to use
touch-tone dialing to enter the access number for your long-
distance service.
To switch from pulse to touch-tone dialing, you need to
change the
PAUSE
key setting from pause only (the
default) to dial options. This procedure describes how to
change the
PAUSE
key setting.
1. At the WorkCentre 450c, press the
MENU
key.
2. Press
5
[Setup] and
ENTER
.
3. Press
7
[Control panel] and ENTER.
4. Press
4
[Pause key] and ENTER.
5. Press
RIGHT ARROW
to display [dial options] and
ENTER
.
The WorkCentre sounds a confirmation beep.
6. Press
STOP
to exit the menus.