Xerox 450c - Manual (Page 81)

81
5. Using the numeric keypad, enter the time.
To change the time, press the LEFT ARROW key to
move the cursor to the left, press the RIGHT ARROW
key to move the cursor to the right, and press the EXIT/
CLEAR key to delete a highlighted number.
6. If you are using a 12-hour clock, press RIGHT
ARROW to switch between am and pm.
7. Press ENTER .
8. Enter the fax number and press START .
The WorkCentre stores the document to memory until it
sends the fax at the specified time.
Note If your document remains in the document tray,
the Always send from memory option is not selected
on the ControlCentre’s Fax Out property page. To
select the option, see
“Changing the fax out options”
later in this chapter.