Document Outline

• ZyWALL 5/35/70 Series
• Copyright
• Certifications
• Safety Warnings
• ZyXEL Limited Warranty
• Customer Support
• Table of Contents
• List of Figures
• List of Tables
• Preface
• Getting to Know Your ZyWALL
  • 1.1 ZyWALL Internet Security Appliance Overview
  • 1.2 ZyWALL Features
    • 1.2.1 Physical Features
    • 1.2.2 Non-Physical Features
  • 1.3 Applications for the ZyWALL
    • 1.3.1 Secure Broadband Internet Access via Cable or DSL Modem
    • 1.3.2 VPN Application
    • 1.3.3 Front Panel Lights
• Introducing the Web Configurator
  • 2.1 Web Configurator Overview
  • 2.2 Accessing the ZyWALL Web Configurator
  • 2.3 Resetting the ZyWALL
    • 2.3.1 Procedure To Use The Reset Button
    • 2.3.2 Uploading a Configuration File Via Console Port
  • 2.4 Navigating the ZyWALL Web Configurator
    • 2.4.1 Title Bar
    • 2.4.2 Main Window
    • 2.4.3 HOME Screen: Router Mode
    • 2.4.4 HOME Screen: Bridge Mode
    • 2.4.5 Navigation Panel
    • 2.4.6 Port Statistics
    • 2.4.7 Show Statistics: Line Chart
    • 2.4.8 DHCP Table Screen
    • 2.4.9 VPN Status
    • 2.4.10 Bandwidth Monitor
• Wizard Setup
  • 3.1 Wizard Setup Overview
  • 3.2 Internet Access
    • 3.2.1 ISP Parameters
    • 3.2.2 Internet Access Wizard: Second Screen
    • 3.2.3 Internet Access Wizard: Registration
  • 3.3 VPN Wizard Gateway Setting
  • 3.4 VPN Wizard Network Setting
  • 3.5 VPN Wizard IKE Tunnel Setting (IKE Phase 1)
  • 3.6 VPN Wizard IPSec Setting (IKE Phase 2)
  • 3.7 VPN Wizard Status Summary
  • 3.8 VPN Wizard Setup Complete
• Tutorial
  • 4.1 Security Settings for VPN Traffic
    • 4.1.1 IDP for From VPN Traffic Example
    • 4.1.2 IDP for To VPN Traffic Example
  • 4.2 Firewall Rule for VPN Example
    • 4.2.1 Configuring the VPN Rule
    • 4.2.2 Configuring the Firewall Rules
• Registration
  • 5.1 myZyXEL.com overview
    • 5.1.1 Subscription Services Available on the ZyWALL
  • 5.2 Registration
  • 5.3 Service
• LAN Screens
  • 6.1 LAN, WAN and the ZyWALL
  • 6.2 IP Address and Subnet Mask
    • 6.2.1 Private IP Addresses
  • 6.3 DHCP
    • 6.3.1 IP Pool Setup
  • 6.4 RIP Setup
  • 6.5 Multicast
  • 6.6 WINS
  • 6.7 LAN
  • 6.8 LAN Static DHCP
  • 6.9 LAN IP Alias
  • 6.10 LAN Port Roles
• Bridge Screens
  • 7.1 Bridge Loop
  • 7.2 Spanning Tree Protocol (STP)
    • 7.2.1 Rapid STP
    • 7.2.2 STP Terminology
    • 7.2.3 How STP Works
    • 7.2.4 STP Port States
  • 7.3 Bridge
  • 7.4 Bridge Port Roles
• WAN Screens
  • 8.1 WAN Overview
  • 8.2 Multiple WAN
  • 8.3 Load Balancing Introduction
  • 8.4 Load Balancing Algorithms
    • 8.4.1 Least Load First
    • 8.4.2 Weighted Round Robin
    • 8.4.3 Spillover
  • 8.5 TCP/IP Priority (Metric)
  • 8.6 WAN General
  • 8.7 Configuring Load Balancing
    • 8.7.1 Least Load First
    • 8.7.2 Weighted Round Robin
    • 8.7.3 Spillover
  • 8.8 WAN Route
  • 8.9 WAN IP Address Assignment
  • 8.10 DNS Server Address Assignment
  • 8.11 WAN MAC Address
  • 8.12 WAN
    • 8.12.1 WAN Ethernet Encapsulation
    • 8.12.2 PPPoE Encapsulation
    • 8.12.3 PPTP Encapsulation
  • 8.13 Traffic Redirect
  • 8.14 Configuring Traffic Redirect
  • 8.15 Configuring Dial Backup
  • 8.16 Advanced Modem Setup
    • 8.16.1 AT Command Strings
    • 8.16.2 DTR Signal
    • 8.16.3 Response Strings
  • 8.17 Configuring Advanced Modem Setup
• DMZ Screens
  • 9.1 DMZ
  • 9.2 Configuring DMZ
  • 9.3 DMZ Static DHCP
  • 9.4 DMZ IP Alias
  • 9.5 DMZ Public IP Address Example
  • 9.6 DMZ Private and Public IP Address Example
  • 9.7 DMZ Port Roles
• Wireless LAN
  • 10.1 Wireless LAN Introduction
    • 10.1.1 Additional Installation Requirements for Using 802.1x
  • 10.2 Configuring WLAN
  • 10.3 WLAN Static DHCP
  • 10.4 WLAN IP Alias
  • 10.5 WLAN Port Roles
  • 10.6 Wireless Security
    • 10.6.1 Encryption
    • 10.6.2 Authentication
    • 10.6.3 Restricted Access
    • 10.6.4 Hide ZyWALL Identity
  • 10.7 Security Parameters Summary
  • 10.8 WEP Encryption
  • 10.9 802.1x Overview
    • 10.9.1 Introduction to RADIUS
    • 10.9.2 EAP Authentication Overview
  • 10.10 Dynamic WEP Key Exchange
  • 10.11 Introduction to WPA
    • 10.11.1 User Authentication
    • 10.11.2 Encryption
  • 10.12 WPA-PSK Application Example
  • 10.13 Introduction to RADIUS
  • 10.14 WPA with RADIUS Application Example
  • 10.15 Wireless Client WPA Supplicants
  • 10.16 Wireless Card
    • 10.16.1 Static WEP
    • 10.16.2 WPA-PSK
    • 10.16.3 WPA
    • 10.16.4 IEEE 802.1x + Dynamic WEP
    • 10.16.5 IEEE 802.1x + Static WEP
    • 10.16.6 IEEE 802.1x + No WEP
    • 10.16.7 No Access 802.1x + Static WEP
    • 10.16.8 No Access 802.1x + No WEP
  • 10.17 MAC Filter
• Firewall
  • 11.1 Firewall Overview
  • 11.2 Packet Direction Matrix
  • 11.3 Packet Direction Examples
    • 11.3.1 To VPN Packet Direction
    • 11.3.2 From VPN Packet Direction
    • 11.3.3 From VPN To VPN Packet Direction
  • 11.4 Security Considerations
  • 11.5 Firewall Rules Example
  • 11.6 Asymmetrical Routes
    • 11.6.1 Asymmetrical Routes and IP Alias
  • 11.7 Firewall Default Rule (Router Mode)
  • 11.8 Firewall Default Rule (Bridge Mode)
  • 11.9 Firewall Rule Summary
    • 11.9.1 Firewall Edit Rule
  • 11.10 Anti-Probing
  • 11.11 Firewall Thresholds
    • 11.11.1 Threshold Values
  • 11.12 Threshold Screen
  • 11.13 Service
    • 11.13.1 Firewall Edit Custom Service
  • 11.14 My Service Firewall Rule Example
• Intrusion Detection and Prevention (IDP)
  • 12.1 Introduction to IDP
    • 12.1.1 Firewalls and Intrusions
    • 12.1.2 IDS and IDP
    • 12.1.3 Host IDP
    • 12.1.4 Network IDP
    • 12.1.5 Example Intrusions
    • 12.1.6 ZyWALL IDP
• Configuring IDP
  • 13.1 Overview
    • 13.1.1 Interfaces
  • 13.2 General Setup
  • 13.3 IDP Signatures
    • 13.3.1 Attack Types
    • 13.3.2 Intrusion Severity
    • 13.3.3 Signature Actions
    • 13.3.4 Configuring IDP Signatures
    • 13.3.5 Query View
  • 13.4 Update
    • 13.4.1 mySecurityZone
    • 13.4.2 Configuring IDP Update
  • 13.5 Backup and Restore
• Anti-Virus
  • 14.1 Anti-Virus Overview
    • 14.1.1 Types of Computer Viruses
    • 14.1.2 Computer Virus Infection and Prevention
    • 14.1.3 Types of Anti-Virus Scanner
  • 14.2 Introduction to the ZyWALL Anti-Virus Scanner
    • 14.2.1 How the ZyWALL Anti-Virus Scanner Works
    • 14.2.2 Notes About the ZyWALL Anti-Virus
  • 14.3 General Anti-Virus Setup
  • 14.4 Signature Searching
    • 14.4.1 Signature Search Example
  • 14.5 Signature Update
    • 14.5.1 mySecurityZone
    • 14.5.2 Configuring Anti-virus Update
  • 14.6 Backup and Restore
• Anti-Spam
  • 15.1 Anti-Spam Overview
    • 15.1.1 Anti-Spam External Database
    • 15.1.2 Spam Threshold
    • 15.1.3 Phishing
    • 15.1.4 Whitelist
    • 15.1.5 Blacklist
    • 15.1.6 SMTP and POP3
    • 15.1.7 MIME Headers
  • 15.2 Anti-Spam General Screen
  • 15.3 Anti-Spam External DB Screen
  • 15.4 Anti-Spam Lists Screen
  • 15.5 Anti-Spam Lists Edit Screen
• Content Filtering Screens
  • 16.1 Content Filtering Overview
    • 16.1.1 Restrict Web Features
    • 16.1.2 Create a Filter List
    • 16.1.3 Customize Web Site Access
  • 16.2 Content Filter General Screen
  • 16.3 Content Filtering with an External Database
  • 16.4 Content Filter Categories
  • 16.5 Content Filter Customization
  • 16.6 Customizing Keyword Blocking URL Checking
    • 16.6.1 Domain Name or IP Address URL Checking
    • 16.6.2 Full Path URL Checking
    • 16.6.3 File Name URL Checking
  • 16.7 Content Filtering Cache
• Content Filtering Reports
  • 17.1 Checking Content Filtering Activation
  • 17.2 Viewing Content Filtering Reports
  • 17.3 Web Site Submission
• IPSec VPN
  • 18.1 IPSec VPN Overview
    • 18.1.1 IKE SA Overview
  • 18.2 VPN Rules (IKE)
  • 18.3 IKE SA Setup
    • 18.3.1 IKE SA Proposal
  • 18.4 Additional IPSec VPN Topics
    • 18.4.1 SA Life Time
    • 18.4.2 IPSec High Availability
    • 18.4.3 Encryption and Authentication Algorithms
  • 18.5 VPN Rules (IKE) Gateway Policy Edit
  • 18.6 IPSec SA Overview
  • 18.7 VPN Rules (IKE): Network Policy Edit
  • 18.8 VPN Rules (IKE): Network Policy Move
  • 18.9 IPSec SA Using Manual Keys
    • 18.9.1 IPSec SA Proposal Using Manual Keys
    • 18.9.2 Authentication and the Security Parameter Index (SPI)
  • 18.10 VPN Rules (Manual)
  • 18.11 VPN Rules (Manual): Edit
  • 18.12 VPN SA Monitor
  • 18.13 VPN Global Setting
  • 18.14 Telecommuter VPN/IPSec Examples
    • 18.14.1 Telecommuters Sharing One VPN Rule Example
    • 18.14.2 Telecommuters Using Unique VPN Rules Example
  • 18.15 VPN and Remote Management
  • 18.16 Hub-and-spoke VPN
    • 18.16.1 Hub-and-spoke VPN Example
    • 18.16.2 Hub-and-spoke Example VPN Rule Addresses
    • 18.16.3 Hub-and-spoke VPN Requirements and Suggestions
• Certificates
  • 19.1 Certificates Overview
    • 19.1.1 Advantages of Certificates
  • 19.2 Self-signed Certificates
  • 19.3 Verifying a Certificate
    • 19.3.1 Checking the Fingerprint of a Certificate on Your Computer
  • 19.4 Configuration Summary
  • 19.5 My Certificates
  • 19.6 My Certificate Details
  • 19.7 My Certificate Export
    • 19.7.1 Certificate File Export Formats
  • 19.8 My Certificate Import
    • 19.8.1 Certificate File Formats
  • 19.9 My Certificate Create
  • 19.10 Trusted CAs
  • 19.11 Trusted CA Details
  • 19.12 Trusted CA Import
  • 19.13 Trusted Remote Hosts
  • 19.14 Trusted Remote Hosts Import
  • 19.15 Trusted Remote Host Certificate Details
  • 19.16 Directory Servers
  • 19.17 Directory Server Add or Edit
• Authentication Server
  • 20.1 Authentication Server Overview
    • 20.1.1 Local User Database
    • 20.1.2 RADIUS
  • 20.2 Local User Database
  • 20.3 RADIUS
• Network Address Translation (NAT)
  • 21.1 NAT Overview
    • 21.1.1 NAT Definitions
    • 21.1.2 What NAT Does
    • 21.1.3 How NAT Works
    • 21.1.4 NAT Application
    • 21.1.5 Port Restricted Cone NAT
    • 21.1.6 NAT Mapping Types
  • 21.2 Using NAT
    • 21.2.1 SUA (Single User Account) Versus NAT
  • 21.3 NAT Overview Screen
  • 21.4 NAT Address Mapping
    • 21.4.1 NAT Address Mapping Edit
  • 21.5 Port Forwarding
    • 21.5.1 Default Server IP Address
    • 21.5.2 Port Forwarding: Services and Port Numbers
    • 21.5.3 Configuring Servers Behind Port Forwarding (Example)
    • 21.5.4 NAT and Multiple WAN
    • 21.5.5 Port Translation
  • 21.6 Port Forwarding Screen
  • 21.7 Port Triggering
• Static Route
  • 22.1 IP Static Route
  • 22.2 IP Static Route
    • 22.2.1 IP Static Route Edit
• Policy Route
  • 23.1 Policy Route
  • 23.2 Benefits
  • 23.3 Routing Policy
  • 23.4 IP Routing Policy Setup
  • 23.5 Policy Route Edit
• Bandwidth Management
  • 24.1 Bandwidth Management Overview
  • 24.2 Bandwidth Classes and Filters
  • 24.3 Proportional Bandwidth Allocation
  • 24.4 Application-based Bandwidth Management
  • 24.5 Subnet-based Bandwidth Management
  • 24.6 Application and Subnet-based Bandwidth Management
  • 24.7 Scheduler
    • 24.7.1 Priority-based Scheduler
    • 24.7.2 Fairness-based Scheduler
    • 24.7.3 Maximize Bandwidth Usage
    • 24.7.4 Reserving Bandwidth for Non-Bandwidth Class Traffic
    • 24.7.5 Maximize Bandwidth Usage Example
  • 24.8 Bandwidth Borrowing
    • 24.8.1 Bandwidth Borrowing Example
  • 24.9 Maximize Bandwidth Usage With Bandwidth Borrowing
  • 24.10 Over Allotment of Bandwidth
  • 24.11 Configuring Summary
  • 24.12 Configuring Class Setup
    • 24.12.1 Bandwidth Manager Class Configuration
    • 24.12.2 Bandwidth Management Statistics
  • 24.13 Bandwidth Manager Monitor
• DNS
  • 25.1 DNS Overview
  • 25.2 DNS Server Address Assignment
  • 25.3 DNS Servers
  • 25.4 Address Record
    • 25.4.1 DNS Wildcard
  • 25.5 Name Server Record
    • 25.5.1 Private DNS Server
  • 25.6 System Screen
    • 25.6.1 Adding an Address Record
    • 25.6.2 Inserting a Name Server Record
  • 25.7 DNS Cache
  • 25.8 Configure DNS Cache
  • 25.9 Configuring DNS DHCP
  • 25.10 Dynamic DNS
    • 25.10.1 DYNDNS Wildcard
    • 25.10.2 High Availability
  • 25.11 Configuring Dynamic DNS
• Remote Management
  • 26.1 Remote Management Overview
    • 26.1.1 Remote Management Limitations
    • 26.1.2 System Timeout
  • 26.2 WWW (HTTP and HTTPS)
  • 26.3 WWW
  • 26.4 HTTPS Example
    • 26.4.1 Internet Explorer Warning Messages
    • 26.4.2 Netscape Navigator Warning Messages
    • 26.4.3 Avoiding the Browser Warning Messages
    • 26.4.4 Login Screen
  • 26.5 SSH
  • 26.6 How SSH Works
  • 26.7 SSH Implementation on the ZyWALL
    • 26.7.1 Requirements for Using SSH
  • 26.8 Configuring SSH
  • 26.9 Secure Telnet Using SSH Examples
    • 26.9.1 Example 1: Microsoft Windows
    • 26.9.2 Example 2: Linux
  • 26.10 Secure FTP Using SSH Example
  • 26.11 Telnet
  • 26.12 Configuring TELNET
  • 26.13 FTP
  • 26.14 SNMP
    • 26.14.1 Supported MIBs
    • 26.14.2 SNMP Traps
    • 26.14.3 REMOTE MANAGEMENT: SNMP
  • 26.15 DNS
  • 26.16 Introducing Vantage CNM
  • 26.17 Configuring CNM
• UPnP
  • 27.1 Universal Plug and Play Overview
    • 27.1.1 How Do I Know If I'm Using UPnP?
    • 27.1.2 NAT Traversal
    • 27.1.3 Cautions with UPnP
    • 27.1.4 UPnP and ZyXEL
  • 27.2 Configuring UPnP
  • 27.3 Displaying UPnP Port Mapping
  • 27.4 Installing UPnP in Windows Example
    • 27.4.1 Installing UPnP in Windows Me
    • 27.4.2 Installing UPnP in Windows XP
  • 27.5 Using UPnP in Windows XP Example
    • 27.5.1 Auto-discover Your UPnP-enabled Network Device
    • 27.5.2 Web Configurator Easy Access
• ALG Screen
  • 28.1 ALG Introduction
    • 28.1.1 ALG and NAT
    • 28.1.2 ALG and the Firewall
    • 28.1.3 ALG and Multiple WAN
  • 28.2 FTP
  • 28.3 H.323
  • 28.4 RTP
    • 28.4.1 H.323 ALG Details
  • 28.5 SIP
    • 28.5.1 STUN
    • 28.5.2 SIP ALG Details
    • 28.5.3 SIP Signaling Session Timeout
    • 28.5.4 SIP Audio Session Timeout
  • 28.6 ALG Screen
• Reports
  • 29.1 Configuring Reports
  • 29.2 System Reports Screen
    • 29.2.1 Viewing Web Site Hits
    • 29.2.2 Viewing Host IP Address
    • 29.2.3 Viewing Protocol/Port
    • 29.2.4 System Reports Specifications
  • 29.3 IDP Threat Reports Screen
  • 29.4 Anti-Virus Threat Reports Screen
  • 29.5 Anti-Spam Threat Reports Screen
• Logs Screens
  • 30.1 Configuring View Log
  • 30.2 Log Description Example
    • 30.2.1 About the Certificate Not Trusted Log
  • 30.3 Configuring Log Settings
    • 30.3.1 Log Descriptions
  • 30.4 Syslog Logs
• Maintenance
  • 31.1 Maintenance Overview
  • 31.2 General Setup and System Name
    • 31.2.1 General Setup
  • 31.3 Configuring Password
  • 31.4 Time and Date
  • 31.5 Pre-defined NTP Time Server Pools
    • 31.5.1 Resetting the Time
    • 31.5.2 Time Server Synchronization
  • 31.6 Introduction To Transparent Bridging
  • 31.7 Transparent Firewalls
  • 31.8 Configuring Device Mode (Router)
  • 31.9 Configuring Device Mode (Bridge)
  • 31.10 F/W Upload Screen
  • 31.11 Backup and Restore
    • 31.11.1 Backup Configuration
    • 31.11.2 Restore Configuration
    • 31.11.3 Back to Factory Defaults
  • 31.12 Restart Screen
• Introducing the SMT
  • 32.1 Introduction to the SMT
  • 32.2 Accessing the SMT via the Console Port
    • 32.2.1 Initial Screen
    • 32.2.2 Entering the Password
  • 32.3 Navigating the SMT Interface
    • 32.3.1 Main Menu
    • 32.3.2 SMT Menus Overview
  • 32.4 Changing the System Password
  • 32.5 Resetting the ZyWALL
• SMT Menu 1 - General Setup
  • 33.1 Introduction to General Setup
  • 33.2 Configuring General Setup
    • 33.2.1 Configuring Dynamic DNS
• WAN and Dial Backup Setup
  • 34.1 Introduction to WAN and Dial Backup Setup
  • 34.2 WAN Setup
  • 34.3 Dial Backup
  • 34.4 Configuring Dial Backup in Menu 2
  • 34.5 Advanced WAN Setup
  • 34.6 Remote Node Profile (Backup ISP)
  • 34.7 Editing PPP Options
  • 34.8 Editing TCP/IP Options
  • 34.9 Editing Login Script
  • 34.10 Remote Node Filter
• LAN Setup
  • 35.1 Introduction to LAN Setup
  • 35.2 Accessing the LAN Menus
  • 35.3 LAN Port Filter Setup
  • 35.4 TCP/IP and DHCP Ethernet Setup Menu
    • 35.4.1 IP Alias Setup
• Internet Access
  • 36.1 Introduction to Internet Access Setup
  • 36.2 Ethernet Encapsulation
  • 36.3 Configuring the PPTP Client
  • 36.4 Configuring the PPPoE Client
  • 36.5 Basic Setup Complete
• DMZ Setup
  • 37.1 Configuring DMZ Setup
  • 37.2 DMZ Port Filter Setup
  • 37.3 TCP/IP Setup
    • 37.3.1 IP Address
    • 37.3.2 IP Alias Setup
• Route Setup
  • 38.1 Configuring Route Setup
  • 38.2 Route Assessment
  • 38.3 Traffic Redirect
  • 38.4 Route Failover
• Wireless Setup
  • 39.1 Wireless LAN Setup
    • 39.1.1 MAC Address Filter Setup
  • 39.2 TCP/IP Setup
    • 39.2.1 IP Address
    • 39.2.2 IP Alias Setup
• Remote Node Setup
  • 40.1 Introduction to Remote Node Setup
  • 40.2 Remote Node Setup
  • 40.3 Remote Node Profile Setup
    • 40.3.1 Ethernet Encapsulation
    • 40.3.2 PPPoE Encapsulation
    • 40.3.3 PPTP Encapsulation
  • 40.4 Edit IP
  • 40.5 Remote Node Filter
  • 40.6 Traffic Redirect
• IP Static Route Setup
  • 41.1 IP Static Route Setup
• Network Address Translation (NAT)
  • 42.1 Using NAT
    • 42.1.1 SUA (Single User Account) Versus NAT
    • 42.1.2 Applying NAT
  • 42.2 NAT Setup
    • 42.2.1 Address Mapping Sets
  • 42.3 Configuring a Server behind NAT
  • 42.4 General NAT Examples
    • 42.4.1 Internet Access Only
    • 42.4.2 Example 2: Internet Access with a Default Server
    • 42.4.3 Example 3: Multiple Public IP Addresses With Inside Servers
    • 42.4.4 Example 4: NAT Unfriendly Application Programs
  • 42.5 Trigger Port Forwarding
    • 42.5.1 Two Points To Remember About Trigger Ports
• Introducing the ZyWALL Firewall
  • 43.1 Using ZyWALL SMT Menus
    • 43.1.1 Activating the Firewall
• Filter Configuration
  • 44.1 Introduction to Filters
    • 44.1.1 The Filter Structure of the ZyWALL
  • 44.2 Configuring a Filter Set
    • 44.2.1 Configuring a Filter Rule
    • 44.2.2 Configuring a TCP/IP Filter Rule
    • 44.2.3 Configuring a Generic Filter Rule
  • 44.3 Example Filter
  • 44.4 Filter Types and NAT
  • 44.5 Firewall Versus Filters
    • 44.5.1 Packet Filtering:
    • 44.5.2 Firewall
  • 44.6 Applying a Filter
    • 44.6.1 Applying LAN Filters
    • 44.6.2 Applying DMZ Filters
    • 44.6.3 Applying Remote Node Filters
• SNMP Configuration
  • 45.1 SNMP Configuration
  • 45.2 SNMP Traps
• System Information & Diagnosis
  • 46.1 Introduction to System Status
  • 46.2 System Status
  • 46.3 System Information and Console Port Speed
    • 46.3.1 System Information
    • 46.3.2 Console Port Speed
  • 46.4 Log and Trace
    • 46.4.1 Viewing Error Log
    • 46.4.2 Syslog Logging
    • 46.4.3 Call-Triggering Packet
  • 46.5 Diagnostic
    • 46.5.1 WAN DHCP
• Firmware and Configuration File Maintenance
  • 47.1 Introduction
  • 47.2 Filename Conventions
  • 47.3 Backup Configuration
    • 47.3.1 Backup Configuration
    • 47.3.2 Using the FTP Command from the Command Line
    • 47.3.3 Example of FTP Commands from the Command Line
    • 47.3.4 GUI-based FTP Clients
    • 47.3.5 File Maintenance Over WAN
    • 47.3.6 Backup Configuration Using TFTP
    • 47.3.7 TFTP Command Example
    • 47.3.8 GUI-based TFTP Clients
    • 47.3.9 Backup Via Console Port
  • 47.4 Restore Configuration
    • 47.4.1 Restore Using FTP
    • 47.4.2 Restore Using FTP Session Example
    • 47.4.3 Restore Via Console Port
  • 47.5 Uploading Firmware and Configuration Files
    • 47.5.1 Firmware File Upload
    • 47.5.2 Configuration File Upload
    • 47.5.3 FTP File Upload Command from the DOS Prompt Example
    • 47.5.4 FTP Session Example of Firmware File Upload
    • 47.5.5 TFTP File Upload
    • 47.5.6 TFTP Upload Command Example
    • 47.5.7 Uploading Via Console Port
    • 47.5.8 Uploading Firmware File Via Console Port
    • 47.5.9 Example Xmodem Firmware Upload Using HyperTerminal
    • 47.5.10 Uploading Configuration File Via Console Port
    • 47.5.11 Example Xmodem Configuration Upload Using HyperTerminal
• System Maintenance Menus 8 to 10
  • 48.1 Command Interpreter Mode
    • 48.1.1 Command Syntax
    • 48.1.2 Command Usage
  • 48.2 Call Control Support
    • 48.2.1 Budget Management
    • 48.2.2 Call History
  • 48.3 Time and Date Setting
• Remote Management
  • 49.1 Remote Management
    • 49.1.1 Remote Management Limitations
• IP Policy Routing
  • 50.1 IP Routing Policy Summary
  • 50.2 IP Routing Policy Setup
    • 50.2.1 Applying Policy to Packets
  • 50.3 IP Policy Routing Example
• Call Scheduling
  • 51.1 Introduction to Call Scheduling
• Troubleshooting
  • 52.1 Problems Starting Up the ZyWALL
  • 52.2 Problems with the LAN Interface
  • 52.3 Problems with the DMZ Interface
  • 52.4 Problems with the WAN Interface
  • 52.5 Problems Accessing the ZyWALL
    • 52.5.1 Pop-up Windows, JavaScripts and Java Permissions
  • 52.6 Packet Flow
• Product Specifications
• Hardware Installation
• Removing and Installing a Fuse
• Setting up Your Computer’s IP Address
• IP Addresses and Subnetting
• Common Services
• Wireless LANs
• Windows 98 SE/Me Requirements for Anti-Virus Message Display
• VPN Setup
• Importing Certificates
• Command Interpreter
• Firewall Commands
• NetBIOS Filter Commands
• Certificates Commands
• Brute-Force Password Guessing Protection
• Boot Commands
• Index
  • Numerics
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Z