XiNCOM Twin WAN XC-DPG402 - Manual (Page 25)

XiNCOM Corp.
Load Balance
This screen is only operational if using Internet connections on both WAN ports.
Figure 10: Load Balance
These settings are only functional if using both WAN ports. If using both WAN ports, these settings
determine the proportion of traffic sent over each port.
Settings – Load Balance
Load Balance
Configuration • Enable – Use this to enable your Load Balance settings. Unless this is
checked, the other settings on this screen have no effect.
• Balance Type – Select the desired option:
• Bytes rx+tx – Traffic is measured by Bytes received and transmitted.
• Packets rx+tx – Traffic is measured by Packets received and transmitted.
• Sessions established – Traffic is measured by Sessions established on
each WAN port.
• Loading Share on WAN 1 – Enter the percentage (%) of traffic to be sent
over WAN 1. If one WAN port connection has greater bandwidth than the
other, the one with the greater bandwidth should be given a higher percentage
of traffic than the other.
Click the "Update" button to save your changes.
Page 23