XiNCOM Twin WAN XC-DPG402 - Manual (Page 46)

SNMP
This section is only useful if you have SNMP (Simple Network Management Protocol) software on
your PC. If you have SNMP software, you can use a standard MIB II file with the XC-DPG Twin WAN
Router.
Figure 23: SNMP
Settings – SNMP
System
Information
• Contact Person – The name of the person responsible for this device.
• Device name – The name of the XC-DPG Twin WAN Router.
• Physical Location – The location of the XC-DPG Twin WAN Router.
Trap Targets Enter the IP address of any targets (PCs running SNMP software) to which you
want traps to be sent. All traps are level 1.
Page 44