XiNCOM Twin WAN XC-DPG402 - Manual (Page 54)

7: QoS Configuration (502 and 602 ONLY)
Overview
The Link Balancer o
Because it will cla fy e
real-time applicatio
QoS Setup
The following web g
pr vides QoS which supports the high quality of network service.
ssi outgoing packets based on some policies defined by users, make som
ns to get better response or performance.
pa e management are guiding you how to setup QoS and make QoS work
Figure 32: QoS Setup
Data –
Qo F
• Queuing Method – The methods that how you manage your queue.” Priority
QoS Setup.
S eature Š Enable QoS – This will allow users enable QoS function.
queuing”. It is one of the first queuing variations to be wildly implemented.
IP TOS
of Service)
Feature 8 bits field in the IP packet header designed to
contain values indicating how each packet should be handled in the network.
If you choose "enable" then it will enable this function to process IP Type of
Service field.
• Overwrite policy priority – Choose “yes” to set the priority of TOS field in IP
packet overwrite the priority defined in policy configuration
( Type • Process TOS Field –An
Page 52