Xantrex Technology PV100S-480 - Manual (Page 42)

Planning
2–8 152315 Rev C
Conduit Penetration
The following illustrations show the recommended locations for electrical conduit
entry into the PV100S enclosures. These drawings are to be used for system
planning purposes, such that the shaded areas are representative of the maximum
allowable area and location in which electrical conduit may penetrate the
enclosures of the PV100S, see Figure 2-3 through Figure 2-8. Xantrex
recommends a standard trade-size conduit knock-out set for cutting/punching the
PV100S enclosures and panels for conduit entry.
Figure 2-3 Conduit Entry Figure Reference
Inverter
Enclosure
Inductor
Enclosure
Communications
Enclosure
Transformer
Enclosure
AC
Interface
Enclosure
DC Interface
Enclosure
Figure 2-4 on page 2–9
Figure 2-8 on page 2–10
A
A
B
C
D
E
B
Figure 2-5 on page 2–9
Figure 2-6 on page 2–10
D
Figure 2-7 on page 2–10
E
A C
AC side view
of PV100S
AC Interface
Enclosure
C
Front view of PV100S