York MILLENNIUM 28971AR - Manual (Page 54)

YORK INTERNATIONAL 54
Dimensions –
YCAS0200 - 0230 (SI)
NOTES:
1. Placement on a level surface free of obstructions (including snow, for winter operation) or air recirculation ensures rated performance,
reliable operation and ease of maintenance. Site restrictions may compromise minimum clearances indicated below, resulting in unpre-
dictable air flow patterns and possible diminished performance. YORK’s unit controls will optimize operation without nuisance high pres-
sure safety cutout; however, the system designer must consider potential performance degradation. Access to the unit control center
assumes the unit is no higher than on spring isolators. Recommended minimum clearances: Side to wall - 2m; rear to wall - 2m; control
panel end to wall - 1.2m; top - no obstructions allowed; distance between adjacent units - 3m. No more than one adjacent wall may be
higher than the unit.
All dimensions are in mm
unless otherwise noted.
DO NOT USE unless
2-compressor unit with
multiple point power
2321
24 (EDGE OF
UNIT TO COOLER
CONNECTION)
CONTROL
TRANSFORMER
SERVICE SWITCH
C
C
B B
457
OPTIONS PANEL
MICRO-COMPUTER
CONTROL CENTER SYS. #1
COILS
SYS. #2
COILS
ALTERNATIVE
POWER OPENING
(178 WIDE x
533 WIDE)
VIEW A-A
LD03751
CONTROL ENTRY
(12) 13
CONDUIT K.O.'S
229
711
51
120
305
51 TYP.
VIEW B-B
VIEW C-C
CONTROL
OPENING
(229 HIGH)
RECOMMENDED
POWER
OPENING
(533 HIGH)
191
800
1067
178
51
LD03751a