ZyXEL Communications NWA3160 - Manual (Page 117)

Chapter 8 Wireless Configuration
ZyXEL NWA-3160 Series User’s Guide
117
Figure 67 Bridge Loop: Two Bridges Connected to Hub
• If your ZyXEL Device (in bridge mode) is connected to a wired LAN while
communicating with another wireless bridge that is also connected to the same wired
LAN.
Figure 68 Bridge Loop: Bridge Connected to Wired LAN
To prevent bridge loops, ensure that you enable STP in the Wireless screen or your ZyXEL
Device is not set to bridge mode while connected to both wired and wireless segments of the
same LAN.
To have the ZyXEL Device act as a wireless bridge only, click WIRELESS > Wireless and
select Bridge/Repeater as the Operating Mode.