ZyXEL Communications NWA3160 - Manual (Page 232)

Chapter 19 Maintenance
ZyXEL NWA-3160 Series User’s Guide
232
Figure 158 Configuration Upload Error
19.6.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyXEL Device to its factory defaults as shown on the screen. The following
warning screen will appear.
Figure 159 Reset Warning Message
You can also press the RESET button to reset your ZyXEL Device to its factory default
settings. Refer to
Section 2.2 on page 43 for more information.
19.7 Restart Screen
System restart allows you to reboot the ZyXEL Device without turning the power off.
Click MAINTENANCE > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.
Figure 160 Restart Screen