ZyXEL Communications NWA3160 - Manual (Page 87)

Chapter 6 AP Controller Mode (NWA-3160 Only)
ZyXEL NWA-3160 Series User’s Guide
87
Figure 53 The Controller > AP Lists Screen
The following table describes the labels in this screen.
Table 18 The Controller > AP Lists Screen
LABEL DESCRIPTION
Managed Access Points List This section lists the access points currently controlled by the ZyXEL
Device. This always includes the ZyXEL Device itself.
Index This is the index number of the AP.
Select Choose the AP whose Description you want to edit or delete, or
whose radio profile you want to change.
IP This is the IP address of the AP.
MAC Address This is the MAC (Media Access Control) address of the AP.
Model This is the model number of the AP.
Description This is the description you enter for the AP.
Status This displays whether the AP is currently active.
•
Red: the AP is not active.
• Green: the AP is active.
• Yellow: the AP is upgrading its firmware.
Edit Choose an AP using the Select field, then click this to change the
AP’s Description, or the radio profile it uses. The AP Lists Edit
screen displays (see Section 6.3.2 on page 88 ).
Delete Choose an AP using the Select field, then click this to remove the
AP from the Managed AP list. You cannot remove the ZyXEL
Device itself from the list.