ZyXEL Communications NWA3160 - Manual (Page 84)

Chapter 6 AP Controller Mode (NWA-3160 Only)
ZyXEL NWA-3160 Series User’s Guide
84
6.1.3 The AP Association List Screen
Use this screen to see information about the wireless clients associated to the APs managed by
the ZyXEL Device. When the ZyXEL Device is in AP controller mode, click Association List
in the Status screen. The following screen displays.
Figure 50 AP Association List
The following table describes the labels in this screen.
6.1.4 The SSID Information Screen
Use this screen to see the security settings used by each wireless network controlled by the AP
controller, and the number of wireless clients associated with each network. Each network is
identified by its SSID (Service Set IDentifier), which is the name of the network.
The information that displays does not differentiate by access point. Your network may have
several APs using the same SSID. This screen displays the number of wireless clients using
the SSID regardless of which AP they are associated with.
Refresh Click this to update this screen immediately.
Reset Click this to return all fields in this screen to zero.
Table 14 AP Statistics
LABEL DESCRIPTION
Table 15 AP Association List
LABEL DESCRIPTION
Index This is the associated client’s index number.
MAC This displays the MAC (Media Access Control) address of the associated
wireless client.
Associated AP This displays the description of the managed access point to which the
wireless client is associated.
SSID This displays the SSID (Service Set Identifier) with which the wireless
client is associated.
Security Mode This displays the type of security used by SSID to which the wireless client
is associated.
Association Time This displays the length of time that the wireless client has been
associated with the managed AP.
Signal Lvl. This displays the RSSI (Received Signal Strength Intensity) of the link
between the wireless client and the managed AP with which it is
associated.
Automatic Refresh
Interval
Select the frequency with which ZyXEL Device updates this screen.
Refresh Click this to update this screen immediately.