ZyXEL Communications NWA3160 - Manual (Page 200)

Chapter 17 Log Screens
ZyXEL NWA-3160 Series User’s Guide
200
17.2 Configuring Log Settings
To change your ZyXEL Device’s log settings, click LOGS > Log Settings. The screen
appears as shown.
Use the Log Settings screen to configure to where and when the ZyXEL Device is to send the
logs and which logs and/or immediate alerts it is to send.
An alert is a type of log that warrants more serious attention. Some categories such as System
Errors consist of both logs and alerts. You may differentiate them by their color in the View
Log screen. Alerts are displayed in red and logs are displayed in black.
"
Not all fields are available on all models.
"
When the ZyXEL Device is in CAPWAP AP controller mode, log messages from
managed APs are relayed to the ZyXEL Device. The ZyXEL Device’s settings in
this screen determine whether events on the managed APs are logged or not.
At the time of writing, AP controller mode is available on the NWA-3160 only.
Notes This field displays additional information about the log entry.
Email Log Now Click Email Log Now to send the log screen to the e-mail address specified in
the Log Settings page.
Refresh Click Refresh to renew the log screen.
Clear Log Click Clear Log to clear all the logs.
Table 78 View Log
LABEL DESCRIPTION