ZyXEL Communications NWA3160 - Manual (Page 88)

Chapter 6 AP Controller Mode (NWA-3160 Only)
ZyXEL NWA-3160 Series User’s Guide
88
6.3.2 The AP Lists Edit Screen
Use this screen to change the description or radio profile of an AP managed by the ZyXEL
Device. Click Edit in the CONTROLLER > AP Lists screen. The following screen displays.
Figure 54 The Controller > AP Lists > Edit Screen
The following table describes the labels in this screen.
Unmanaged Access Points List This section lists the CAPWAP-enabled access points in the area
that are in managed AP mode, but are not currently controlled by the
ZyXEL Device.
Index This is the index number of the unmanaged AP.
Select Choose the unmanaged AP to have managed by the ZyXEL Device
and click Add.
IP This is the IP address of the unmanaged AP.
MAC Address This is the MAC (Media Access Control) address of the unmanaged
AP.
Model This is the model number of the unmanaged AP.
Description This is the description you enter for the unmanaged AP.
Add Click this to add an unmanaged AP to the Managed Access Points
list.
Automatic Refresh Interval Enter how often you want the ZyXEL Device to update this screen.
Refresh Click this to update this screen immediately.
Table 18 The Controller > AP Lists Screen
LABEL DESCRIPTION
Table 19 The Controller > AP Lists > Edit Screen
LABEL DESCRIPTION
Model This is the model number of the managed AP.
MAC Address This is the MAC (Media Access Control) address of the managed AP.
Description Enter a short description of this access point (up to 32 English keyboard
characters).
WLAN1 Radio Profile Select the radio profile you want to use for this AP. Configure radio profiles
in the Profile Edit > Radio screen.
Select Disable if you do not want to use a radio profile. The AP’s radio is
not active when you select Disable.