Xantrex Technology 175 PLUS - Manual (Page 27)

26
3. Take the cables equipped with battery clips on one end
( Figure 6 ) and place the ring terminals over the two cabling
terminals on the back of the inverter. (The cabling terminals
are shown in
Figure 4 .))
Caution! Reverse Polarity
Power connections of the 12 volts DC battery to the
XPower must be positive to positive and negative to
negative.
A reverse polarity connection (positive to negative)
will blow a fuse in the inverter and may permanently
damage the unit. Damage caused by a reverse
polarity connection is not covered by your warranty.
Caution!
Make sure you connect red to red and black to black,
and make sure you screw the nuts on tightly.