Overload shutdown, Over temperature shutdown, High input voltage shutdown – Xantrex Technology 175 PLUS User Manual
Page 30: Shutting the inverter off, Operating normal loads
29
Overload Shutdown
If you connect an AC load that is rated too
high (see Table 1 on page 30) or a load that draws excessive
surge power, the XPower shuts down. The red
FAULT
light
comes on.
Over Temperature Shutdown
The XPower shuts down
automatically if it exceeds its safe operating temperature. The red
FAULT
light comes on.
High Input Voltage Shutdown
If a defective battery charging
system causes the battery voltage to rise to dangerously high
levels, the XPower shuts down automatically. The red
FAULT
light comes on.
Shutting the Inverter Off
•
If you are going to disconnect the battery, turn the inverter
off first.
•
Turn the inverter off using the front panel On/Off switch.
Operating Normal Loads
The XPower is capable of continuously powering most 120-volt
AC products with the following power rating maximums: