Handling the printer, Unpack and inspect the printer, Store the printer – Zebra ZM400 User Manual

Page 25: Ship the printer

Advertising
background image

17

Printer Setup

Handling the Printer

3/27/07

ZM400/ZM600 User Guide

79695L-001 Rev. A

Handling the Printer

This section describes how to handle your printer.

Unpack and Inspect the Printer

When you receive the printer, immediately unpack it and inspect for shipping damage.

• Save all packing materials.

• Check all exterior surfaces for damage.

• Raise the media door, and inspect the media compartment for damage to components.

If you discover shipping damage upon inspection:

• Immediately notify the shipping company and file a damage report.

• Keep all packaging material for shipping company inspection.

• Notify your authorized Zebra reseller

Store the Printer

If you are not placing the printer into immediate operation, repackage it using the original
packing materials. You may store the printer under the conditions shown in

Table 3

.

Ship the Printer

If you must ship the printer:

• Turn off (

O

) the printer, and disconnect all cables.

• Remove any media, ribbon, or loose objects from the printer interior.

• Close the printhead.

• Carefully pack the printer into the original container or a suitable alternate container to

avoid damage during transit. A shipping container can be purchased from Zebra if the
original packaging has been lost or destroyed.

Important •

Zebra Technologies Corporation is not responsible for any damage incurred

during the shipment of the equipment and will not repair this damage under warranty.

Table 3 • Storage Temperature and Humidity

Temperature

Relative Humidity

–40°F to 140°F (–40° to 60°C)

5% to 85% non-condensing

Advertising
This manual is related to the following products: